Proxmark3 Easy RDV4
The RDV4-class Proxmark3 — the reference open-hardware tool for LF and HF RFID research, in the compact Easy form factor.
| Price | A$119.00 A$119.00 · US$78.29 · 78.29 USDC |
|---|---|
| Payment | AUD card/bank · USDC (Base) · Monero |
Compliance: shipped as general-purpose electronics; radio/EMC regulatory status documented per SKU (AU/NZ/US/UK/EU).
About this accessory
The Proxmark3 is the tool serious RFID researchers reach for, and the Easy RDV4 revision packs the same LF (125 kHz) and HF (13.56 MHz) capability into a smaller board with an integrated antenna pair. It reads, writes, emulates and sniffs across the common low-frequency and high-frequency tag families — HID Prox, EM4100, T5577, MIFARE Classic/Ultralight, and ISO14443/15693 targets — and the open-source client (ICEMAN fork) is actively maintained with a documented workflow for essentially every commercial tag format. This is a halo SKU for us: units are sample-tested before listing, flashed with current firmware, and supported with plain-English setup notes for Windows and Linux, because the stock AliExpress experience is a board in a bubble bag and guesswork.
Features
- Full LF (125 kHz) and HF (13.56 MHz) RFID capability in the compact RDV4 Easy form
- Read, write, emulate and sniff across HID Prox, EM4100, T5577, MIFARE and ISO14443/15693
- Runs the actively maintained open-source ICEMAN client
- Sample-tested and firmware-current before dispatch, with setup notes included
Specs
| RFID bands | LF 125 kHz, HF 13.56 MHz |
|---|---|
| Interfaces | USB, standalone button mode |
| Antennas | integrated LF + HF (RDV4 Easy) |
| Firmware/client | Proxmark3 Iceman fork |
| Regulatory | built on pre-certified RF modules (FCC/CE module grants); RCM/EESS compliance folder maintained for AU/NZ sale. |
In the box
- Proxmark3 Easy RDV4 unit
- USB cable
- Printed setup + firmware note
In stock — ships fast