Build to order

StealthMesh Duo: Pre-Configured Mesh Pair

Two Heltec V3 nodes, flashed and pre-configured to our community mesh channel — open the box, add power, and you're on the network.

Price	A$152.00 A$152.00 · US$100.00 · 100.00 USDC
Hardware	`2x Heltec V3 (ESP32-S3 + SX1262), cased, + 2x 915-928 MHz whip antennas`
Firmware	Meshtastic (pre-configured to the StealthOz community channel) — open source, SHA-256 verified · verify your flash
Availability	Built to order — ongoing
Payment	AUD card/bank · USDC (Base) · Monero

LAWFUL USE ONLY. Operates under the ACMA LIPD class licence on 915-928 MHz — no licence required, but no interference protection either; LIPD users must accept interference and must not cause it. Join only mesh channels you are authorised to use.

Compliance: shipped as general-purpose electronics; radio/EMC regulatory status documented per SKU (AU/NZ/US/UK/EU).

About this unit

The fastest way onto a community LoRa mesh in Australia: two Heltec V3 nodes (ESP32-S3 + SX1262) in printed cases with 915-928 MHz whips, flashed with Meshtastic and pre-configured to the StealthOz community channel at our bench. The community channel is free forever — you buy hardware, not access. Both nodes are paired and radio-checked before dispatch, so they see one another the moment you power up. Expect 2-15 km per hop with decent height and line of sight; this is a community mesh network, not a telecom product, and we won't pretend otherwise. Each node ships with its channel QR code so friends and family can join in seconds.

Features

Two Heltec V3 nodes (ESP32-S3 + SX1262), cased, with 915-928 MHz whips
Pre-configured to the StealthOz community channel — free forever, no subscription
Paired and radio-checked at our bench before dispatch; ships with channel QR code
AES-256 encryption with member-held keys — we hold no channel keys and cannot read your traffic
Assembled and configured in our AU workshop

Specs

Radio	SX1262 LoRa, 915-928 MHz (Meshtastic ANZ region)
MCU	ESP32-S3 (Heltec WiFi LoRa 32 V3)
Licence	ACMA LIPD class licence — no licence needed; devices must not exceed 1 W EIRP
Encryption	AES-256 channel PSK, held by channel members only
Range	2-15 km per hop with height and line of sight (shorter in built-up areas)

In the box

2x Heltec V3 nodes, cased (Meshtastic, pre-configured)
2x 915-928 MHz SMA whip antennas
2x USB-C charge/data cables
Printed quick-start card + community channel QR code

Firmware options — what this device can actually run

Every entry is verified against the project's own device table or install docs.

Meshtastic ↗	Heltec V3 is an official production target; ships flashed and pre-configured. Free community channel — no subscription, ever.
Bruce ↗	Alternative flash if you'd rather use the pair as security tooling — pick at checkout, flashed at the bench.

Compare everything we build side by side on the firmware & OS matrix →

Lawful use. Operates under the ACMA LIPD class licence on 915-928 MHz — no licence required, but no interference protection either; LIPD users must accept interference and must not cause it. Join only mesh channels you are authorised to use.

Built to order in our AU workshop — ships in 3-7 business days