Build to order

StealthMesh Field Kit: T-Beam + Solar Node

A solar-ready field node: T-Beam with GPS, a 12V 6Ah LiFePO4 pack, an EPEVER solar controller and a tuned whip — configured to our community channel before it ships.

Price	A$241.68 A$241.68 · US$159.00 · 159.00 USDC
Hardware	`LILYGO T-Beam (SX1262 + GPS) + LiFePO4 12V 6Ah pack + EPEVER LS1024B solar controller + 915-928 MHz whip`
Firmware	Meshtastic (pre-configured to the StealthOz community channel) — open source, SHA-256 verified · verify your flash
Availability	Built to order — ongoing
Payment	AUD card/bank · USDC (Base) · Monero

LAWFUL USE ONLY. Operates under the ACMA LIPD class licence on 915-928 MHz — no licence required; devices must not exceed 1 W EIRP and LIPD users get no interference protection. Solar/battery wiring is your responsibility — follow AS/NZS 3000 practice for any permanent install.

Compliance: shipped as general-purpose electronics; radio/EMC regulatory status documented per SKU (AU/NZ/US/UK/EU).

About this unit

For off-grid mesh coverage: a LILYGO T-Beam (SX1262 + GPS) — GPS tagging so your node appears correctly on the community map — a 12V 6Ah LiFePO4 pack with built-in BMS, an EPEVER LS1024B 10A PWM solar controller ready for your own panel, and a 915-928 MHz whip. We flash Meshtastic and pre-configure the node to the StealthOz community channel — free forever — and bench-test the full power path before dispatch. The GPS-located node and battery make this the kit you mount on a shed roof or take to a property to extend the mesh. Expect 2-15 km per hop with height and line of sight; this is community mesh infrastructure you own, not a service we sell.

Features

LILYGO T-Beam (SX1262 + GPS) — GPS-located so it maps correctly on the community dashboard
12V 6Ah LiFePO4 pack with built-in BMS — days of runtime, thousands of cycles
EPEVER LS1024B 10A PWM solar controller — connect your own 12V panel
Pre-configured to the StealthOz community channel — free forever, no subscription
Full power path bench-tested and radio-checked in our AU workshop

Specs

Radio	SX1262 LoRa, 915-928 MHz (Meshtastic ANZ region)
MCU/GNSS	ESP32 + u-blox GNSS (LILYGO T-Beam)
Power	12V 6Ah LiFePO4 (BMS) + EPEVER LS1024B 10A PWM controller (12/24V auto)
Licence	ACMA LIPD class licence — no licence needed; keep EIRP at or below 1 W
Range	2-15 km per hop with height and line of sight (shorter in built-up areas)

In the box

T-Beam Meshtastic node, flashed and pre-configured
12V 6Ah LiFePO4 battery pack with BMS
EPEVER LS1024B 10A solar charge controller
915-928 MHz SMA whip antenna
Printed quick-start card + community channel QR code

Firmware options — what this device can actually run

Every entry is verified against the project's own device table or install docs.

Meshtastic ↗	T-Beam is an official production target; ships flashed and pre-configured. Free community channel — no subscription, ever.
Bruce ↗	Alternative flash for tooling use — pick at checkout.

Compare everything we build side by side on the firmware & OS matrix →

Lawful use. Operates under the ACMA LIPD class licence on 915-928 MHz — no licence required; devices must not exceed 1 W EIRP and LIPD users get no interference protection. Solar/battery wiring is your responsibility — follow AS/NZS 3000 practice for any permanent install.

Built to order in our AU workshop — ships in 3-7 business days