In stock — ships fast

Heltec V3 Meshtastic Node (ESP32-S3 + SX1262, Cased)

A Heltec WiFi LoRa 32 V3 with a printed case — an off-the-shelf Meshtastic node for the AU915 band.

Price	A$74.91 A$74.91 · US$49.28 · 49.28 USDC
Payment	AUD card/bank · USDC (Base) · Monero

LAWFUL USE ONLY. A development board and ISM-band LoRa node for your own mesh. Transmit only on licence-free 868/915 MHz bands with approved firmware — unauthorised transmission on other bands or interference with licensed services is illegal.

Compliance: shipped as general-purpose electronics; radio/EMC regulatory status documented per SKU (AU/NZ/US/UK/EU).

About this accessory

The Heltec V3 pairs an ESP32-S3 with a Semtech SX1262 LoRa radio and a 0.96-inch OLED, and it is one of the most widely supported boards in the Meshtastic firmware ecosystem — flash it, pick the AU915 region, and it joins a mesh of battery-friendly nodes that pass messages device-to-device without any network. The printed case keeps the OLED, button and USB-C port accessible while protecting the board in a pocket or on a shelf. Use it as a mesh node, a test radio for mesh planning, or an ESP32-S3 devboard in its own right.

Features

ESP32-S3 + SX1262 — natively supported by Meshtastic firmware
0.96" OLED shows messages and signal stats
Printed case keeps OLED, buttons and USB-C accessible
AU915-compatible ISM-band LoRa with pre-certified module
Also a standalone ESP32-S3 WiFi/LoRa devboard

Specs

MCU	ESP32-S3 (WiFi + BLE)
Radio	SX1262 LoRa, 868/915 MHz (AU915 plan)
Display	0.96" OLED
Compliance	pre-certified ESP32 radio module; operate only on licence-free ISM bands per ACMA rules

In the box

Heltec V3 board
Printed case
LoRa antenna

Lawful use. A development board and ISM-band LoRa node for your own mesh. Transmit only on licence-free 868/915 MHz bands with approved firmware — unauthorised transmission on other bands or interference with licensed services is illegal.

In stock — ships fast