In stock — ships fast

Flipper WiFi Multiboard (ESP32+nRF24+CC1101)

One expansion board that adds WiFi, 2.4 GHz and sub-GHz radios to a Flipper Zero through its GPIO header.

Price	A$97.28 A$97.28 · US$64.00 · 64.00 USDC
Payment	AUD card/bank · USDC (Base) · Monero

LAWFUL USE ONLY. A general-purpose development and radio research board. Use it only on networks and systems you own or are authorised to test — unauthorised access or interference is illegal.

Compliance: shipped as general-purpose electronics; radio/EMC regulatory status documented per SKU (AU/NZ/US/UK/EU).

About this accessory

The Flipper Zero is a strong pocket tool, but its radios stop at sub-GHz and 13.56 MHz — no WiFi, no native 2.4 GHz. This multiboard fills that gap: an ESP32 for WiFi and BLE work, an nRF24L01 for 2.4 GHz, and a CC1101 for sub-GHz, all on a single board that connects through the Flipper's GPIO header. It is a WiFi devboard in its own right and can also run standalone with ESP32 firmware when you don't have the Flipper attached. If your workflow already lives on the Flipper and you keep reaching for separate devboards to cover WiFi and 2.4 GHz, this consolidates them into one attachment.

Features

Three radios on one board: ESP32 WiFi/BLE, nRF24L01 2.4 GHz, CC1101 sub-GHz
Connects to Flipper Zero via the standard GPIO header — no soldering
Doubles as a standalone ESP32 WiFi devboard
Compatible with common Flipper expansion firmware and apps
Compact form factor that travels with the Flipper

Specs

MCU	ESP32
Radios	nRF24L01 (2.4 GHz), CC1101 (sub-GHz)
Connection	Flipper Zero GPIO header
Use	Flipper expansion or standalone devboard

In the box

Multiboard (ESP32 + nRF24 + CC1101)
GPIO header pre-fitted

Lawful use. A general-purpose development and radio research board. Use it only on networks and systems you own or are authorised to test — unauthorised access or interference is illegal.

In stock — ships fast