ADS-B 1090 MHz Outdoor Antenna (9 dBi, SMA/N)
A collinear fibreglass outdoor antenna cut for 1090 MHz — the hardware upgrade that turns an ADS-B feeder into a real one.
| Price | A$34.90 A$34.90 · US$22.96 · 22.96 USDC |
|---|---|
| Payment | AUD card/bank · USDC (Base) · Monero |
LAWFUL USE ONLY. A passive receive-only antenna for ADS-B and other 1090 MHz signals. Listening to broadcast aviation signals is lawful; use it for reception, not transmission.
Compliance: shipped as general-purpose electronics; radio/EMC regulatory status documented per SKU (AU/NZ/US/UK/EU).
Compliance: shipped as general-purpose electronics; radio/EMC regulatory status documented per SKU (AU/NZ/US/UK/EU).
About this accessory
Feeder sites live and die on antenna choice. This 9 dBi collinear is cut for the 1090 MHz ADS-B band, with a fibreglass radome for outdoor mounting and a pigtail to match either SMA or N-type feeder runs. Mounted on a mast with clear sky view, it reliably multiplies message rate and range versus the magnetic-whip antennas most feeders start with. Receive-only: it pairs with your existing RTL-SDR or flight-tracking receiver, and it draws no power and transmits nothing.
Features
- Cut for 1090 MHz ADS-B — no tuning needed
- 9 dBi collinear gain for long-range reception
- Fibreglass radome for permanent outdoor mounting
- Receive-only: pairs with RTL-SDR and ADS-B receivers
- Typical upgrade path from the stock whip most feeders start on
Specs
| Frequency | 1090 MHz (ADS-B) |
|---|---|
| Gain | 9 dBi collinear |
| Connector | SMA / N-type pigtail |
| Compliance | passive receive-only antenna — reception of broadcast aviation signals; no transmission, no licence required in AU for receive-only |
In the box
- 1090 MHz outdoor antenna
- Mounting hardware
Lawful use. A passive receive-only antenna for ADS-B and other 1090 MHz signals. Listening to broadcast aviation signals is lawful; use it for reception, not transmission.
In stock — ships fast